Table of Contents
Advertisement
Preparing Controllers and Cameras
Preparing Controllers
No special preparation is required with this product as processing items are pre-installed.Please check
that the controller is switched on and that the Main screen is displayed.
For details, see the User's Manual.
The first time the program is started up, the Language Setting window is displayed, so select the
language.
Reference:
Selecting the Language [Language Setting] (p.110)
Adjusting Cameras
Confirm what kind of images are being taken.
Adjust the position of measurement objects and the focus of the lens.
1.
Tap [
] of "Image mode" in [Image display] of the Main screen Control area, and select
"Through".
The through images captured from the camera are viewed in the Image Display area.
Reference:
Changing Display Contents (p.69)
Note
The same operation is available by tapping [View] - [Image mode] - [Through].
●
2.
Adjust the position of measurement objects so that they display at the center of the monitor.
3.
Adjust the focal distance of the lens.
When using an auto-focus camera or an intelligent camera, focus and the iris can be
automatically adjusted.
Note
If a camera is used together with a lens, turn the focus ring of the lens to adjust the focus.
●
Reference:
"Processing Item List Manual", "Lens Setting" (p.21)
The light intensity of an intelligent camera can be adjusted from the controller.
●
Reference:
"Processing Item List Manual", "Lighting Control" (p.18)
FZ3 User's Manual
Preparing Controllers and Cameras
1
19
Advertisement
Table of Contents
