Table of Contents
Advertisement
<Parameters explanation>
System +
Specifies the name of the file to be read with a definite path (ex.: \USBDisk\abc.bkd).
scene group
Only files that are under the following systems and have a "BKD" extension can be read.
data
- RAMDisk
File name
- USBDisk
Important
Do not turn off power to the controller until there is a response.
●
(Example)
When "LABEL1.BKD" in the "IMG01" folder of the USB memory to which the drive name "USBDisk2" is
assigned is loaded to the controller
<Command>
<Response>
BKDSAVE
The system + scene group 0 data currently being used by the controller is saved to a file.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Specifies the save destination and file name during saving with a definite path (ex.:
File name of
\USBDisk\abc.bkd).
system +
Save destinations include directories under the following systems.Be sure to attach a "BKD"
scene group
extension to the file name.
data
- RAMDisk
- USBDisk
FZ3 User's Manual
Controlling/Outputting through Serial Communication (Non-procedure)
6
153
Advertisement
Table of Contents
