Omron FZ3 Series User Manual page 160

<Command>
<Response>
Changing current image display status
Changes the currently displayed image mode.
<Command format>
6
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Display
image mode
No.
(Example)
When changing the current image mode to "Last NG"
<Command>
<Response>
IMGSAVE
Saves image data.
158 Controlling/Outputting through Serial Communication (Non-procedure)
0: Changes the image modes of all the windows to "Through"
1: Changes the image modes of all the windows to "Freeze"
2: Changes the image modes of all the windows to "Last NG"
FZ3 User's Manual