Omron FZ3 Series User Manual page 159

Note
<Hour: 2 digits>, <Minute: 2 digits>, and <Second: 2 digits> can be omitted during setting.Settings cannot be
●
updated when these are omitted, however, and the previous time will be kept unchanged.
Allowable omission patterns include "omitting <second> only", "omitting <minute> and <second>", omitting
<hour>, <minute>, and <second>". Patterns that cannot be used include "omitting <hour> only" and "omitting
<minute> only".
(Example)
When changing the date and time to 8/30/2007, 12:30:00
<Command>
<Response>
DISPCOND
Acquiring the current image display status
Acquires the currently displayed image mode.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
0: Through
View State 1: Freeze or Freeze and Last NG together
2: Last NG
(Example)
When the current image mode is "Through"
FZ3 User's Manual Controlling/Outputting through Serial Communication (Non-procedure)
6
157