Table of Contents
Advertisement
<Response>
Changing processing unit parameters
The set parameters for the processing units set in the scene currently being used are changed.
<Command format>
6
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Processing unit
No.
External
reference table
No.
Setting data
(Example)
When "Skipping angle" (external reference table value "124") in [Search] set as the 6th processing unit
(processing unit number "5") is changed to "10"
<Command>
<Response>
174
Controlling/Outputting through Serial Communication (Non-procedure)
Specifies the processing unit No. (0 to 9999).
Varies depending on the specified processing unit processing items.For details, see the
"External Reference Table" of the processing items registered in the processing unit.
Reference:
External Reference Tables (p.195)
Set the settings data parameters.
FZ3 User's Manual
Advertisement
Table of Contents
