Omron FZ3 Series User Manual page 170

(Example)
When "LABEL.SGP" in the "IMG01" folder of the USB memory to which the drive name "USBDisk2" is
assigned is loaded to scene group 3
<Command>
<Response>
Note
For the USB memory drive, see Reference:
●
6
SGRSAVE
Saves scene group data.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Scene group
No.
Save
destination
Important
If the specified file name already exists, this existing file will be overwritten
●
Do not turn off power to the controller until there is a response.
●
168 Controlling/Outputting through Serial Communication (Non-procedure)
Specifies the scene group No. to save (0 to 31).
Specifies the save destination and file name during saving with a definite path.
Save destinations include directories under the following systems.Be sure to attach an "SGP"
extension to the file name.
- USBDisk
- RAMDisk
About USB Drive Names (p.94) .
FZ3 User's Manual