Table of Contents
Advertisement
Example) When 1 expressions are set in [Parallel Data Output]:
6
Note
The output signal functions the same as when "Output Control" is set to "None".
●
Reference:
Input signal
Signal
DI0 to 6
DI7
Note
The ERROR signal turns on when the input command is not correctly performed.
●
When "Output Control" Is Set to "Handshaking"
The controller outputs measurement results while synchronized with external devices. If this function is
used when multiple measurement results are output in sequence, it enables efficient and effective data
transfer.
186
Controlling/Outputting through Parallel Communication
When "Output Control" Is Set to "None" (p.184)
OFF
This is the execution trigger.
After DI0 to 6 is set, turn DI7 ON after an interval over 1 ms.
Function
FZ3 User's Manual
Advertisement
Table of Contents
