Omron FZ3 Series User Manual page 174

Important
Do not turn off power to the controller until there is a response.
●
(Example)
When "LABEL.INI" in the "IMG01" folder of the USB memory to which the drive name "USBDisk2" is
assigned is loaded
<Command>
<Response>
6
SYSSAVE
Saves system data.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Save
destination
Important
If the specified file name already exists, this existing file will be overwritten
●
Do not turn off power to the controller until there is a response.
●
(Example)
When data stored in scene group 3 is saved with the file name "LABEL.INI" in the "IMG01" folder in the
USB memory to which the drive name "USBDisk2" is assigned
172 Controlling/Outputting through Serial Communication (Non-procedure)
Specifies the save destination and file name during saving with a definite path.
Save destinations include directories under the following systems.Be sure to attach an "INI"
extension to the file name.
- USBDisk
- RAMDisk
FZ3 User's Manual