Omron FZ3 Series User Manual page 172

(Example)
When the image logging setting is acquired when the setting for acquiring the current image logging
save condition is 1 (save only for NG error)
<Command>
<Response>
The current image logging save condition is "1: Only NG".
6
Changes settings related to image logging
Changes setting related to current image logging.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Setting data
Image Logging
Folder name of image logging save
destination
Prefix for image logging file name
Data Logging
Name of destination folder for
saving data logging
170 Controlling/Outputting through Serial Communication (Non-procedure)
Identifier 1
0: None
●
imageLogging 1: Only NG
●
2: All
●
Save destination folder name (one-byte alphanumeric
imageLoggingDirectory
character)
Prefix for image logging file name (one-byte
imageLoggingHeader
alphanumeric characters)
0: None
●
dataLogging 1: Only NG
●
2: All
●
Save destination folder name (one-byte alphanumeric
dataLoggingDirectory
character)
Set value
FZ3 User's Manual