Omron FZ3 Series User Manual page 165

When processing is not performed normally
<Parameters explanation>
Scene No. Specifies the scene No. after switching (0 to 31).
(Example)
When switching to scene 2
<Command>
<Response>
SCNGROUP or SG
Acquires scene group No.
Acquires the current scene group No.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Scene group
The acquired scene group No. (currently used scene group No.) is output as a response (0 to 31).
No.
FZ3 User's Manual Controlling/Outputting through Serial Communication (Non-procedure)
6
163