Checking Communication Status (Parallel Interface) - Omron FZ3 Series User Manual

Checking Communication Status (Parallel Interface)

Check the communication status with the external devices connected with a parallel interface. You can
check whether wiring and communication settings have been performed correctly.
1.
On the Main screen, tap [System] - [Communication] - [Parallel].
The Parallel window is displayed.
2.
Tap [Confirmation] to check the I/O status.
6
ON
STEP0,
STEP1
DSA0, DSA1
DI
RUN
GATE0,
GATE1
BUSY
OR0, OR1
ERR
READY0,
READY1
DO
Important
That status of each of the parallel terminal signals STEP, DSA, GATE, OR, and READY can be checked
●
on the screen with STEP0, DSA0, GATE0, OR0, and READY0.
180 Controlling/Outputting through Parallel Communication
The input status of each signal from the external device to the controller is displayed.
When a signal is input, the background color becomes red.
The output status of each signal is displayed.
When a signal is output, the background color becomes red.
The output status from each signal of the controller to external devices can be
specified.
Changes between ON and OFF and between 0 and 1 can be simulated without
performing measurement.
Description
FZ3 User's Manual