Editing Scenes; Copying A Scene; Clearing A Scene - Omron FZ3 Series User Manual

Editing Scenes

Copying a Scene

2
Copies and pastes scenes within a scene group.
This is a convenient function for reusing a created scene with only one portion being changed.
1.
On the Main screen, tap [Scene] - [Scene maintenance].
The Scene Maintenance window is displayed.
2.
In the scene list, tap the source scene to copy, and then tap [Copy].
3.
In the scene list, tap the scene to which the copy is to be pasted and then tap [Paste].
The confirmation window for overwriting is displayed.
4.
Tap [Yes].
The copied scene data is written over the scene selected as the destination.
5.
Tap [Close].

Clearing a Scene

Clear scene settings and return to factory default values. This section describes how to initialize
measurement contents for each scene.
1.
On the Main screen, tap [Scene] - [Scene maintenance].
The Scene Maintenance window is displayed.
2.
Tap the scene to be cleared from scene list.
52 Editing Scenes FZ3 User's Manual