Controlling/Outputting through Parallel Communication
This section describes how to set communication specifications and the I/O format required when
communicating with external devices through a parallel interface.
Setting Communication Specifications (Parallel Interface)
Set the controller communication specifications. Use the same communication specification settings for
the controller and the external device.
Note
During setting of communication specifications, input signals cannot be handled. However, the input status can
●
be checked with [confirmation].
Reference:
1.
On the Main screen, tap [System] menu - [Communication] - [Standard Parallel I/O].
The Parallel window is displayed.
7
2.
Tap [Setting] to set communication specifications.
540
Controlling/Outputting through Parallel Communication
Checking the Communication Status (Parallel Interface) (p.542)
FZ4 User's Manual