Omron FZ3 Series User Manual page 154

Settings acquisition/change command
Command
DATE
DISPCOND
SYSDATA
VERGET
Backup/Restore commands
Command
BKDLOAD
6
BKDSAVE
DATASAVE
IMGSAVE
SCNLOAD
SCNSAVE
SGRLOAD
SGRSAVE
SYSLOAD
SYSSAVE
Utility commands
Command
CLRMEAS
RESET
BKDLOAD
Reads system + scene group 0 data.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
152 Controlling/Outputting through Serial Communication (Non-procedure)
Abbreviation
Acquires the current date and time
OFF
Sets the date/time
Acquires the current image display status
OFF
Changes the image display state
Acquires settings related to image logging
OFF
Changes settings related to image logging
OFF Acquires system version information
Abbreviation
OFF Loads System + Scene group 0 data
OFF Saves System + Scene Group 0 data in a file
OFF Saves System + Scene group data in the controller's memory
OFF Saves the image data
OFF Loads the Scene data
OFF Saves the Scene data
OFF Loads the scene group data
OFF Saves the scene group data
OFF Loads system data
OFF Saves system data
Abbreviation
OFF Clears all of the measurement values of the current scenes
OFF Restart the controller
Function
Function
Function
References
Reference: Detai l s (p.155)
Reference: Detai l s (p.157)
Reference: Detai l s (p.169)
Reference: Detai l s (p.175)
References
Reference: Details (p.152)
Reference: Details (p.153)
Reference: Details (p.154)
Reference: Details (p.158)
Reference: Details (p.165)
Reference: Details (p.166)
Reference: Details (p.167)
Reference: Details (p.168)
Reference: Details (p.171)
Reference: Details (p.172)
References
Reference: Details (p.154)
Reference: Details (p.161)
FZ3 User's Manual