YASKAWA GA800 600 V Drive Installation & Primary Operation page 35

3.
Push or
4.
Push or
5.
Push or
6.
Push or
7.
Push or
• Push [Default] to set the parameter to factory default.
• Push [Min/Max] to show the minimum value or the maximum value on the display.
8.
Push to keep the changes.
9.
Continue to change parameters, then push
you change all the applicable parameters.
YASKAWA TOEPC7106170VA GA800 600 V Drive Installation & Primary Operation
to select [Parameters], then push
to select [C Tuning], then push
to select [C1 Accel & Decel Time], then push
to select C1-01, then push
to select the specified digit, then push
.
.
.
.
or to select the correct number.
[Back], [Home] to go back to the home screen after
10 Drive Start-Up Procedure
35