YASKAWA GA800 600 V Drive Installation & Primary Operation page 16

6 Mechanical Installation
2.
Loosen the front cover screws.
3.
Push on the four tabs found on each side of the front cover, then pull the front cover forward to remove it from
the drive.
A - Pull forward to remove the front cover.
4.
Remove the front cover from the drive.
Reattach the Front Cover
Wire the drive and other peripheral devices then reattach the front cover.
Note:
Wire the grounding terminals first, main circuit terminals next, and control circuit terminals last.
16
Figure 6.4 Loosen the Front Cover Screws
Figure 6.5 Pull Forward to Remove the Front Cover
Figure 6.6 Remove the Front Cover
YASKAWA TOEPC7106170VA GA800 600 V Drive Installation & Primary Operation
B - Unhook the tabs found on the sides of the front
cover.