Resetting Cross Track Error (Xte) - Raymarine E Series Reference Manual

81244_4.book Page 80 Thursday, January 31, 2008 1:53 PM
80
Advance to the next waypoint in a route
If you are following a route, you have the option to advance to the next waypoint in
that route.
To advance to the next waypoint in a route:
Note:
waypoint in the route.

Resetting cross track error (XTE)

When you are following a route or going to a waypoint, you can restart the XTE. This
results in a new course from the current vessel position to the current target waypoint.
Restarting XTE is useful if you find yourself off track and want to go straight to your
target, rather than get back onto the original track.
Although RESTART XTE causes your vessel to change course, it does not affect the
saved route.
2
3
4
W.Wight
5
GOTO...
Or
Position cursor over route
If the current destination is the last waypoint, then it advances on to the first
When you are following a route ..
E-Series Networked Display Reference Manual
Example:
W.Wight
1
In this example, the advance
waypoint option was selected
following arrival at Waypoint 2.
This has resulted in Waypoint 3
being dismissed and the course of
the route advancing to Waypoint 4.
ADVANCE
WAYPOINT
RESTART XTE