Presets; To Assign A Channel To A Preset; To Delete A Channel From A Preset; To Move A Channel To A New Preset - Raymarine E Series Reference Manual

81244_4.book Page 256 Thursday, January 31, 2008 1:53 PM
256

15.6 Presets

You can assign up to 18 channels to presets to make tuning, scanning and browsing
easier. To assign a channel to a preset, use the PRESETS softkey from the main control
screen or the EDIT PRESETS softkey from any of the following screens:
• Setup channels
• Browse channels
At the Edit Preset Channels screen you can select a preset and assign a channel to it,
move the assigned channel to a different preset, or delete the assigned channel.
Toggle between the Preset Channels list and the Channel List either by using the
trackpad (left/right) or by pressing the appropriate softkey.

To assign a channel to a preset

1. Select an unused preset number from the Preset List.
2. Press the ASSIGN NEW CHANNEL softkey.
3. Select the target channel from the Channel List.
4. Press the ASSIGN TO PRESET softkey.
Note:

To delete a channel from a preset

1. In the Preset Channels list, select the preset you want to clear.
2. Press the DELETE CHANNEL softkey.

To move a channel to a new preset

1. Use the rotary controller or trackpad to select the preset you want to move.
2. Press MOVE TO NEW PRESET.
3. Scroll to the preset you want to move the channel to.
4. Press MOVE TO NEW PRESET.
Note:
prompted to confirm the action.

15.7 Parental locking

You can set up blocks on certain channels so that they can only be played if a correct
password is entered. Parental locking must be enabled for the blocks on your selected
channels to be effective.
By default, blocking is not enabled.
If the preset you want to use already has a channel assigned to it, delete the preset first.
You can overwrite a channel that has already been assigned to a preset, but you will be
E-Series Networked Display Reference Manual