Where Am I On The Chart; Moving Around The Chart - Raymarine E Series Reference Manual

81244_4.book Page 53 Thursday, January 31, 2008 1:53 PM
Chapter 4: Using the Chart

4.5 Where am I on the chart?

D6627-1
Boat symbol
If positional data has been selected for display your position will be displayed in the
data bar under VES POS.
If you cannot see your boat:
To mark your current position:
Note: For more information on waypoints, please refer to the Waypoint Chapter.

4.6 Moving around the chart

To move around the chart and display the area required at the appropriate scale, use a
combination of zooming and panning.
Note:
motion mode is suspended - see page 52 and page 101.
Panning
D6583-3
Note:
Zooming in/out
OUT
RANGE
D6585-2
IN
Note:
chart scale. Some areas provide detail at smaller scales than others.
Your current position is represented on screen by a boat symbol. If
neither heading nor COG data is available, the vessel is shown as a
solid circle.
FIND
SHIP
Toggle to FIND SHIP
WPTS
x2
MOB
When you pan the chart, or when you change the scale in autorange mode, the
Panning moves the chart that is displayed to a different area. To pan a
chart, simply press the appropriate arrow (left/right, up/down) on the
trackpad. When the cursor reaches the edge of the screen, the chart pans.
When you pan the chart, active motion mode is suspended.
When you zoom in, the chart scale changes to show a smaller area in more
detail. Conversely, if you zoom out the chart area displayed is increased
but the detail is reduced.
D6585-1
The cartographic detail available on charts varies according to the chart and the
Chart redraws with boat at centre
(or wait 3 seconds)
OK
Accepts default
53