Raymarine E Series Reference Manual page 101

81244_4.book Page 77 Thursday, January 31, 2008 1:53 PM
Chapter 4: Using the Chart
The waypoint and its dotted line are removed from the screen and the cursor moves
back to the previous waypoint. If you repeatedly press these keys, successive
waypoints are removed.
Delete a waypoint from the new route list
If you insert a waypoint incorrectly into a route that you are building via the waypoint
list, you can remove it:
Waypoints
Crag Rock
Blyth Bay
Sandy Bay
To abandon the route build
To cancel the route that you are currently building (on-screen or via the waypoint list):
CANCEL
Saving routes
Once you have built your route either on screen and/or via the waypoint list you have
the option to either:
• Save and immediately follow the built route (Quick Route)
• Save the built route for later use (and rename it if required).
Quick routes
A route that is saved and immediately followed is referred to as a Quick Route. If a
Quick Route already exists, it is overwritten unless you rename it (see
FOLLOW (QUICK)
To save the built route for later use
o
SAVE ROUTE...
Note:
Make Route
New Route
01 Sandy Bay
02 Crag Rock
03 Rush Creek
Highlight incorrect
waypoint
YES
Route saved under 'Quick Route'
ROUTE
Follow route commences
Save Route
Name
Route 1
Color
For further details on editing a dialog box, please refer to page 13
Make Route
Waypoints
REMOVE
Crag Rock
WAYPOINT
Blyth Bay
Sandy Bay
Remaining waypoints close-up
and renumber accordingly
Or:
EDIT NAME
Or:
To accept default
OK
77
New Route
01 Sandy Bay
02 Rush Creek
page 98 ).
EDIT COLOR