Chapter 11:Video; Introduction; Setting Up The Video Application; Displaying A Video Application - Raymarine E Series Reference Manual

81244_4.book Page 225 Thursday, January 31, 2008 1:53 PM
Chapter 11: Video

Chapter 11:Video

11.1 Introduction

The video application allows you to use your E-Series Display to view images from a
video player, on board camera or DVD player. Your Display is supplied with cabling to
connect to equipment using a composite input source. You can also connect s-video
inputs to your Display. Video images can only be seen by the Display they are
connected to and are therefore not viewable across the E-Series network.
Up to four video inputs, dependent on the type, can be viewed on each E-Series display.
You can set up the video application to cycle the display of each video input. You can
also adjust the brightness, contrast, color and aspect ratio of the image.
Note:
possible input configurations, please refer to your installation guide.

11.2 Setting up the video application

Displaying a video application

Before you can use the video application, you will need to include a video
application window in a page set. For details of how to select a particular window
and application, please refer to page 17.
Notes: (1)
For details of how to connect such equipment to your E-Series display and the
Only one video application can be viewed per page.
The video application settings are locally applied and will therefore only
(2)
affect the individual display on which you are working.
225