Renaming An Existing Group - Raymarine E Series Reference Manual

81244_4.book Page 46 Thursday, January 31, 2008 1:53 PM
46
4. Determine the group that the waypoint is to be moved to as follows:
GROUP A
My Waypoints
Waypoint 1
Waypoint 2
Waypoint 3
5. Select waypoint to be moved:
Note:
soft keys reflect this accordingly.

Renaming an existing group

You can change the name of an existing waypoint group:
1. Display the group list (see
2. Select the group for renaming:
3. Edit the selected group name:
Note:
MOVE BETWEEN GROUPS GROUP LIST
GROUP B
Fishing
SELECT GROUP B
Move control to
Group B
Repeat until all changes made
MOVE BETWEEN GROUPS GROUP LIST
GROUP A GROUP B
My Waypoints Fishing
Waypoint 1
Waypoint 2
Waypoint 3
Move control to Group A.
Select required waypoint.
Alternatively, waypoints can be moved from Group B to Group A if required. The
page 44
GROUP LIST
My Waypoints
Deep fishing
Shallow fishing
Reef fishing
Select required
group
EDIT GROUP
NAME
To revert to the original name whilst editing, press CANCEL.
E-Series Networked Display Reference Manual
GROUP LIST
My Waypoints
Deep fishing
Shallow fishing
Reef fishing
Select group to
add waypoint to
MOVE WAYPOINT
FROM A TO B
).
RENAME GROUP...
NEW WAYPOINT
G
Edit name
OK
OK
OK
Save new
name