Other 3D Controls; Soft Keys - Raymarine E Series Reference Manual

81244_4.book Page 118 Thursday, January 31, 2008 1:53 PM
118
Rotating and pitching
Select
Toggle control between the rotate and
pitch functions.
Adjust
Turn the rotary control to adjust the
active function:
• Rotate - rotates the view 0-360
• Pitch - changes the vertical angle of
view. (1-90 degrees)
Note:
key sub-menus are displayed, except when adjusting exaggeration).This is different to
most other uses of the rotary, which require you to press a soft key to enable adjust-
ment.

5.7 Other 3D controls

Soft keys

The soft keys control the application as follows:
To find your boat and
reinstate active
motion mode, forward
looking chart view.
FIND SHIP
0
The rotary control is always active to adjust pitch/rotation (even when the soft
To select center point
around which the chart
will move when rotary
control used.
To select an existing
route to follow or a
waypoint to go to.
GO TO...
To rotate or pitch chart around virtual eye
point, maintaining a relative position from
the virtual eye point to the on-screen boat.
Useful for aerial overview.
Rotates or pitches chart
around center-of-view
cross. Useful for close
up views.
E-Series Networked Display Reference Manual
OR
Press
Turn
.
To adjust presentation options:
Transducer cone
Depth scale
Direction of view
Exaggeration
To select how Vessel offset
rotary control Declutter
adjusts view Waypoint name (ON/OFF)
ADJUST ON ADJUST
EYE CENTER ROTATE PITCH
To rotate chart
o
(0-360 ).
To change vertical
angle of view.
(from sea-level to a
full top-down aerial).
ADJUST
ROTATE PITCH
PRESENTATION...