Raymarine E Series Reference Manual page 103

81244_4.book Page 79 Thursday, January 31, 2008 1:53 PM
Chapter 4: Using the Chart
Follow using the cursor
You can either use the cursor to select and follow a route from the start of the route or
from a selected waypoint within the route.
... from the start of the route
... from a selected waypoint within the route
Follow using the route list
This option directs you to the start of the route that you have selected on the route list
and then follows it:
Follow in reverse order
This option reverses the waypoint order (i.e. the last waypoint of the original route is
now the first) and renumbers the waypoints accordingly. The route name moves to the
reassigned first waypoint and then the system automatically activates the reverse-
follow route function.
Note:
Position cursor over any
leg of required route
Position cursor over
appropriate waypoint
GOTO...
FOLLOW ROUTE
Or:
OPTIONS...
ROUTES...
GOTO...
FOLLOW ROUTE
Or:
OPTIONS...
ROUTES...
To stop following an active route at any time, press
FOLLOW THIS
ROUTE
FOLLOW FROM
HERE
Route List
Color Name
---- Quick Route
---- Route 1
FOLLOW ROUTE
---- Route 2
---- Route 3
Select route to To start follow route
follow
Route List
Color Name
---- Quick Route
REVERSE AND
---- Route 1
FOLLOW
---- Route 2
---- Route 3
Reverse-follow
Select required
route starts
route
.
STOP FOLLOW
79