Tuning To A Channel; Browsing Channels - Raymarine E Series Reference Manual

81244_4.book Page 254 Thursday, January 31, 2008 1:53 PM
254
The softkeys give you access to the functions outlined in
Toolbar
Table 15-1:
MUTE ON/OFF
PRESETS...
SETUP CHANNELS...
ALERTS...
BROWSE...

15.2 Tuning to a channel

From the Sirius Control screen, you tune to channels using the trackpad on the E-Series
Display (or you can enter preset numbers directly using the alphanumeric keypad if you
have one).
Trackpad up
Trackpad down
Trackpad left
Trackpad right

15.3 Browsing channels

The browse function allows you to view play data for channels without tuning to them.
To browse channels
1. On the Sirius Audio Control screen, press the BROWSE softkey.
Pressing this key displays the Channel List or Preset List for browsing. Toggle
between the two lists with the VIEW ALL/PRE softkey.
2. Use the rotary controller or trackpad to scroll through the channels.
3. Press the TUNE TO CHANNEL softkey (or the rotary controller) to listen to the
selected channel.
To go back to the Sirius Control screen, press OK or CANCEL.
.
Sirius Audio Toolbar
Controls the mute setting.
Displays a list of preset channels and the full chan-
nel list with modify options. Use the trackpad or
rotary controller to scroll through the list of presets.
Gives access to the Edit Presets, Edit Alerts, Edit
Channel Access, Scan Channels softkeys.
Lets you set up an alert to tell you when favourite
songs or artists are played on any channel.
Scroll to view play data and to select channels, pre-
sets, or categories.
Next channel.
Previous channel.
First channel in the previous category.
First channel in the next category.
E-Series Networked Display Reference Manual
Table 15-1, Sirius Audio