Go To An Existing Waypoint; Resetting Cross Track Error (Xte); Arriving At Your Target Waypoint - Raymarine E Series Reference Manual

81244_4.book Page 71 Thursday, January 31, 2008 1:53 PM
Chapter 4: Using the Chart

Go to an existing waypoint

You can navigate to an existing waypoint by either selecting the appropriate waypoint
on-screen with the cursor or by selecting it from the waypoint list:
Note:
3:Working with Waypoints.
... selected with the cursor
This option navigates you to the waypoint that you select on screen.
... selected via the waypoint list
This option selects the waypoint that you wish to navigate to from the waypoint list.
:

Resetting cross track error (XTE)

When you are following a waypoint, you can restart the XTE. This results in a new
course from the current vessel position to the current target waypoint.
Restarting XTE is useful if you find yourself off track and want to go straight to your
target, rather than get back onto the original track.

Arriving at your target waypoint

When you arrive at the target (active) waypoint:
• An alarm sounds and
• A warning message is displayed.
For more information on navigating with Waypoints, please refer to Chapter
GO TO WAYPOINT
WPT
Position cursor
over required
waypoint.
GOTO
Or GOTO WAYPOINT
OPTIONS ...
WPTS/
MOB
Dashed line from boat to
active (boxed) waypoint.
Navigation commences.
Waypoint List
GOTO WAYPOINT
Select required
waypoint
71