Resetting Your System - Raymarine E Series User Reference Handbook

4.7 Resetting your system

Your system may be reset to its factory default settings if required.
There are 2 types of reset operation, both of which affect the current
display you are using, AND any networked displays.
• Settings reset.
• Settings and data reset.
Settings reset
This option resets your setup menus, page sets, and databar
settings to factory default. It will NOT affect your waypoints, routes,
or tracks data.
Settings and data reset
In addition to the settings reset detailed above, performing a settings
and data reset will also remove ALL waypoints, routes, and tracks
data.
Performing a settings reset
1. Press the MENU button.
2. Select System Setup.
3. Select Settings Reset.
4. If you have password-protected your waypoints, enter your
waypoint password and press the OK button.
5. Select the YES option to perform the reset, or select the NO
option to abort.
Performing a settings and data reset
Performing a settings and data reset erases ALL waypoints, routes,
and track data from your system. BEFORE proceeding with a
settings and data reset, ensure that you backup any data that you
want to keep on to a memory card.
48
1. Press the MENU button.
2. Select System Setup.
3. Select Settings and Data Reset.
4. If your waypoints have password protection, enter your waypoint
password and press the OK button.
5. Select the YES option to perform the reset, or select NO to abort.
E-Series Widescreen User reference