Step 4: Installing The Drain Bottle - Roland TrueVIS VF2-640 Setup Manual

Step 4: Installing the Drain Bottle

Procedure
A
Remove the bottom plug.
Discharged fluid used in the inspection when the printer was shipped may remain. Exercise caution.
B
Install the drain funnel.
Screw the drain funnel all the way into the hole where the bottom plug was attached.
IMPORTANT
Use caution to turn the bottle without applying excessive force.
C
Install the drain bottle stand.
Insert the drain bottle stand into the groove on the bottom surface of the printer unit, and then push the
drain bottle stand to the front.
Bottom plug
1. Assembly and Ink Filling
2.Installation
39