Table of Contents
Advertisement
2.
Set the TR2 cleaning liquid in its slot, and then select the ink type.
A
When the screen shown below appears, set the pouch tray in which you have set the TR2
cleaning liquid pouch in the cleaning liquid slot.
Insert the pouch trays as far as they will go.
SET CL-LIQUID
FOR WIPER
B
Press [ ] or [ ] to select the ink type, and then press [ENTER].
SELECT INK TYPE
TR2 LkOrGrW
SELECT INK TYPE
TR2 LkOrGr
Name to select
TR2 LkOrGrW
TR2 LkW
TR2 LkOr
TR2 LkOrGr
TR2 4C
C
Press [ ] or [ ] to select [YES], and then press [ENTER].
If the ink type is incorrect, select [NO], and then press [ENTER] to start again from step
*
TR2 LkW
[YES]
NO
* The display changes depending on the selected ink type.
* "CL-LIQUID FOR WIPER" indicates the TR2 cleaning liquid.
SELECT INK TYPE
TR2 LkW
SELECT INK TYPE
TR2 4C
Cyan (C)
Light cyan (Lc)
Magenta (M)
Light magenta (Lm)
Yellow (Y)
Light black (Lk)
Black (K)
White (W)
Lk only
Lk only
1. Assembly and Ink Filling
SELECT INK TYPE
TR2 LkOr
Orange
Green (Gr)
B
.
2.Installation
(Or)
47
Advertisement
Table of Contents
