Table of Contents
Advertisement
1. Assembly and Ink Filling
2.
Fix the printer unit to the stand.
A
With six or more workers, firmly hold the lifting bars and lift up the printer unit.
CAUTION
CAUTION
CAUTION
B
Place the printer unit on the stand, and then temporarily tighten the bolts in the order of
Set the assembled stand upright, and then fix the printer unit to it by tightening the (long) bolts
(8 locations in total). Use a washer for each (long) bolt.
30
2.Installation
Be sure to perform this work with six or more people. Have at least one person
hold each of the four ends of the lifting bars and at least one person hold each
end of the housing.
Tasks that require undue effort when performed by a small number of persons may
result in physical injury. Also, if dropped, such items may cause injury.
Before lifting up the printer unit, check that the lifting bars do not rattle.
If the lifting bars rattle, retighten the bolts fixing them in place.
When not using the lifting bars, be sure to perform the work with eight or more people.
Tasks that require undue effort when performed by a small number of persons may
result in physical injury. Also, if dropped, such items may cause injury.
1
2
,
.
Tighten
temporarily
Bolts (long): 8
Washers: 8
Advertisement
Table of Contents
