Roland TrueVIS VF2-640 Setup Manual page 9

Hide thumbs Also See for TrueVIS VF2-640:
Table of Contents

Advertisement

Danger of electrical short, electrical shock, or fire
WARNING
Connect to an electrical outlet that
complies with this machine's ratings (for
voltage, frequency, and current).
Incorrect voltage or insufficient current may
cause fire or electrical shock.
Never use outside or in any location where
exposure to water or high humidity may
occur. Do not touch the power cord, plug,
or electrical outlet with wet hands.
Doing so may result in fire or electrical shock.
Never allow any foreign object to get inside.
Never expose the machine to liquid spills.
Inserting objects such as coins or matches
or allowing beverages to be spilled into the
ventilation ports may result in fire or electrical
shock. If anything gets inside, immediately
disconnect the power cord and contact your
authorized Roland DG Corporation dealer.
Never place any flammable object nearby.
Never use a combustible aerosol spray
nearby. Never use in any location where
gases can accumulate.
Combustion or explosion could occur.
Handle the power cord, plug, and electrical
outlet correctly and with care. Never use
any article that is damaged.
Using a damaged article may result in fire or
electrical shock.
When using an extension cord or power
strip, use one that adequately satisfies the
machine's ratings (for voltage, frequency,
and current).
Use of multiple electrical loads on a single
electrical outlet or of a lengthy extension cord
may cause fire.
Connect to ground.
This can prevent fire or electrical shock due to
current leakage in the event of malfunction.
To Ensure Safe Use
WARNING
Position so that the power plug is within
immediate reach at all times.
This is to enable quick disconnection of the
power plug in the event of an emergency.
Install the machine next to an electrical outlet.
Also, provide enough empty space to allow
immediate access to the electrical outlet.
If sparks, smoke, burning odors, unusual
sounds, or abnormal operation occur,
immediately unplug the power cord. Never
use if any component is damaged.
Continuing to use the machine may result in
fire, electrical shock, or injury. Contact your
authorized Roland DG Corporation dealer.
Do not use the supplied power cord for
other products.
Never use the machine for any purpose for
which it is not intended, or use the
machine in an excessive manner that
exceeds its capacity.
Doing so may result in injury or fire.
For accessories (optional and consumable
items, power cord, and the like), use only
genuine articles compatible with this
machine.
Incompatible items may lead to an accident.
7

Advertisement

Table of Contents
loading

Table of Contents