Table of Contents
Advertisement
1. Assembly and Ink Filling
Step 2: Assembling the Printer Unit and the Stand
IMPORTANT
If you will not use the lifting bars, proceed to
situation, be sure to perform the work with eight or more people.
1.
Attach the lifting bars to the printer unit.
MEMO
• The lifting bars and the lifting bar fixing bolts are not included with the printer. The worker
performing the installation will bring them to the work area.
• Attach the lifting bars with the printer unit in the packing box.
State after attaching the lifting bars
A
Temporarily tighten the lifting bar fixing bolts (4 locations in total) on the bottom surface of
the printer unit.
There are 4 screw holes on each side of the bottom surface. Use the 2 inner holes on each side.
Tighten the lifting bar fixing bolts until you can see approximately 10 mm (0.4 in.) of their threads.
28
2.Installation
P. 30 "2. Fix the printer unit to the stand."
Approx.
10 mm
(0.39 in.)
. However, in that
Tighten
temporarily
Lifting bar fixing
bolts: 4
Advertisement
Table of Contents
