1. Assembly and Ink Filling
Step 4: Installing the Drain Bottle
Procedure
Remove the bottom plug.
A
Discharged fluid used in the inspection when the printer was shipped may remain. Exercise cau-
tion.
Install the drain funnel.
B
Screw the drain funnel into the hole where the bottom plug was attached.
IM PORTANT
Use caution to turn the bottle without applying excessive force.
Install the drain bottle stand.
C
Insert the drain bottle stand into the groove on the bottom surface of the printer unit, and then
push the drain bottle stand to the front.
40
2.Installation
Bottom plug