Step 1: Assembling The Stand - Roland TrueVIS VF2-640 Setup Manual

Step 1: Assembling the Stand

Procedure
A
Place the caster on the stand leg.
Place the stand leg with the tabletop plate facing down, and then place the caster on top of the stand
leg. The casters have no particular front and rear orientation.
B
Lightly tighten the bolts in the 4 upper locations and then in the 4 locations on the sides.
For the 4 upper locations, first tighten the bolts in the narrow slots. In this way you can attach the caster
in the correct position.
Wide Narrow
Tighten the
bolt here first.
1. Assembly and Ink Filling
Tabletop plate
Tighten
temporarily
Bolts (short): 8
2.Installation
25