Step 3: Installing The Drain Bottle - Roland TrueVIS VG-640 Setup Manual

Step 3 : Installing the Drain Bottle
Procedure
A
Remove the bottom plug.
Use caution, because discharged fluid used in the inspection when the printer was shipped may remain.
B
Install the drain bottle.
Screw the drain bottle into the hole where the bottom plug was attached. Use caution to turn the bottle
without applying excessive force.
Leave the drain bottle attached at all times.
Only remove the drain bottle when you are disposing of the discharged fluid. Unnecessarily removing the
drain bottle may lead to the discharged fluid spilling.
Bottom plug
3. Assembly and Ink Filling
13