Roland TrueVIS VF2-640 Setup Manual page 33

C
Fully tighten the bolts in the order of
Tighten the (long) bolts securely. Loose (long) bolts may cause the stand to wobble.
D
Remove the lifting bars.
Loosen the lifting bar fixing bolts (4 locations in total) on the bottom surface of the
1
printer unit.
Remove the lifting bars by sliding them to the back of the printer unit.
2
1 2
, .
1. Assembly and Ink Filling
Tighten fully
Bolts (long): 8
Washers: 8
2.Installation
31