Transport Safety; To Safely Attach The Product On A Trailer For Transport - Husqvarna R419TsX AWD Workshop Manual

Table of Contents

Advertisement

Never cut grass across a slope. Do not
cut grass on ground that slopes more than
10°.
Never carry passengers on the product or
equipment.
Move forward.
Neutral gear.
Move rearward.
Parking brake.
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European Community's
Directive. The product's emission is
specified in the Technical data chapter
and on the label.
Always use approved hearing protection.
Stop the engine.
Start the engine.
Engine speed – fast.
Engine speed – slow.
Fuel.
Max. ethanol 10%.
Cutting height.
Servicing position for the cutting height
lever.
6 - Safety
The blades are engaged.
The blades are disengaged.
Servicing position for the cutting deck.
Operation position for the cutting deck.
Engage and disengage the drive system.
Oil level.
Note: Other symbols/decals on the product refer to
certification requirements for some commercial areas.

2.7 Transport safety

Use an approved transport vehicle for transportation
of the product.
A markets national or local regulations can set limit
to the transportation of the product.
The operator of the transport vehicle is responsible
to attach the product safely during transport.
2.8 To safely attach the product on a trailer for
transport
Before you attach the product, you must read and
understand the safety chapter. Refer to
instructions on page 4 .
WARNING: The parking brake is not sufficient
to lock the product during transport. Attach the
product tightly to the load area.
Equipment: 2 approved straps and 4 wheel blocks in the
shape of a wedge.
1. Park the product in the center of the load area.
General safety
914 - 003 - 28.03.2019

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

R420tsx awd

Table of Contents