Husqvarna R419TsX AWD Workshop Manual page 34

Table of Contents

Advertisement

5. Loosen the clip that holds the throttle cable and, if
attached, the choke cable. Disconnect the cables
from the carburetor casing.
6. Remove the hose clamps adjacent to the fuel filter
and pull the fuel hose down. A small quantity of fuel
can come out of the hoses or filter.
7. Disconnect the fuel return hose.
34 - Repair instructions
8. Remove the nuts (A) that hold the heat shield on the
exhaust pipe and remove the heat shield.
A
9. Remove the clamps (B) on the exhaust pipe.
10. Remove the exhaust pipe.
11. Remove the spring on the belt tensioner and lift the
transmission belt from the belt tensioner.
12. Loosen the PTO clutch. Refer to
clutch on page 37 .
A
B
To remove the PTO
914 - 003 - 28.03.2019

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

R420tsx awd

Table of Contents