Husqvarna R419TsX AWD Workshop Manual page 67

9.9.3 To remove and install the transmission belt
1. Remove the lower belt covers. Refer to
the lower belt covers on page 27 .
2. Remove the top belt cover. Refer to
install the top belt cover on page 27 .
3. Remove the transmission cover. Refer to
and install the transmission cover on page 27 .
4. Remove the cooling fan nut and the cooling fan.
5. Loosen the spring on the belt tensioner.
6. Remove the transmission belt from the hydrostatic
transmission pulley with a screwdriver and a wrench.
914 - 003 - 28.03.2019
7. Loosen the spring on the tension pulley of the main
To remove
To remove and
To remove
8. Pull the main belt from the engine pulley and put it to
9. Remove the spring on the PTO clutch.
belt.
the side.
Repair instructions - 67