To Put Supports Below The Product - Husqvarna R419TsX AWD Workshop Manual

WARNING: For transport vehicles with a
cover, let the product become cool before
you put the product below the cover.
2. Make sure that the center of gravity of the product is
above the wheel axle of the transport vehicle. If a
trailer is used for transport, make sure that the down
force on the tow bar is correct.
3. Apply the parking brake.
4. Lock the product with the Husqvarna Connect app.
5. Lower the cutting deck to the mow position.
6. Remove all loose objects.
7. Assemble the first strap through the rear
transmission frame.
8. Tighten the strap rearward.
9. Put the second strap through the transport eyelet.
10. Attach the strap to the load area.
11. Tighten the strap in the direction of the front of the
load area.
914 - 003 - 28.03.2019
12. Put the wheel blocks in front of and behind the rear
wheels.

2.9 To put supports below the product

WARNING: Always put supports on the two
sides of the product to make it stable.
1. Park the product on a hard and level ground.
2. Remove the cutting deck. Refer to
cutting deck on page 12 .
3. Put a jack assembly below the front or rear skid
plate and lift the product.
4. Put the front supports below the equipment frame.
To remove the
Safety - 7