Husqvarna R419TsX AWD Workshop Manual page 31

3. Put a container below the couplings of the hydraulic
hoses.
4. Disconnect the hydraulic hoses from the couplings
below the product.
5. Put supports below the product in front of the
articulated steering. Make sure that the hydraulic
hoses are not damaged.
6. Disassemble the rear wheels.
7. Loosen the locknuts (A) of the steering cables.
8. Hold the cable with a wrench and remove the
adjuster nuts (B).
9. Remove the tension spring on the transmission belt.
914 - 003 - 28.03.2019
B
A
10. Remove the ball joint for the speed control (A).
B
11. Remove the clamp on the speed control cable (B)
from the rear frame.
12. Remove the locknut and the hydrostatic
transmission fan.
13. Remove the rear belt from the idler pulley and
remove the pulley.
14. Remove the snap ring (A) and washer (B) from the
pivoting rear axle and pull off the rear frame.
A
A
B
Repair instructions - 31