Install The Valve Harness - Raven SmarTrax Installation Manual

Install the Valve Harness

Valve Harness Connected to the Node Harness
FIGURE 8.
Connect the green 12-pin connector of the valve harness (P/N 115-4001-167) into the mating 12-pin
1.
connector of the node harness (P/N 115-4001-166).
Valve Harness Routed Outside the Cab
FIGURE 9.
Route the valve harness through the access hole in the corner post and out the floor in the right-rear corner
2.
of the cab.
Route the valve harness to the MacDon steering valve, located under the front left-center of the cab.
3.
Manual No. 016-5030-009 Rev. A
Cab Component Installation
11