Installing The Software From The [Scansnap Setup] Dialog Box - Fujitsu ScanSnap S1500 Installation And Troubleshooting Manual

■ Installing the software from the [ScanSnap Setup]
dialog box
Once you have uninstalled the software or removed the installation information, install the
software from the [ScanSnap Setup] dialog box.
Install the software in the following procedure.
1.
Restart your computer.
2.
Log on as a user with Administrator privileges.
3.
If an anti-virus software is running, disable the software temporarily.
ATTENTION
If you cannot disable the anti-virus software, check if the software is set to lock the application.
4.
Insert the Setup DVD-ROM into the DVD-ROM drive.
The [ScanSnap Setup] dialog box appears.
HINT
If the [ScanSnap Setup] dialog box does not appear, double-click "ScanSnap.exe" in the Setup
DVD-ROM via Windows Explorer.
If you have installed the software before
20