Data Length
HP-IB Adrs
IBASIC Echo
Inst Echo
This field specifies the number of bits used for each word of serial data when
using the rear-panel serial port.
This setting is retained when the instrument is turned off.
This field is used to display and change the HP-IB address of the Test Set.
Operating Considerations
The address can be set from 0 to 30 by using the DATA keys, or by pushing and
then turning the cursor-control knob.
This setting is retained when the instrument is turned off.
This field enables/disables screen and error message echoing from IBASIC.
This setting is retained when the instrument is turned off.
This field enables/disables character and screen echoing when using an external
ASCII RS-232 terminal or computer to enter or edit IBASIC programs.
This setting is retained when the instrument is turned off.
Chapter 12, I/O Configure Screen
Field Descriptions
439