HP 8920A User Manual page 371

Send Mode
Standard
Stop
TOC Time
This field selects the output format used when
sequence.
• Single outputs the entire sequence once.
• Burst outputs the sequence the number of times specified in the Bursts field.
• Cont causes the sequence to be output continuously until Stop is selected.
This field selects the digitally-coded squelch standard for your radio.
Selecting this field stops the data stream being output when the
to or . After this field is selected, the current repetition of the data
Cont Burst
stream is finished, and the turn-off code is output.
Turn-off code time defines the length of time the turn-off code is output.
Operating Considerations
This code is always the last information output before the encoder's
indicator changes from
stream is sent. If no TOC is desired, set this field to
Chapter 10, Signaling Encoder (AF Generator 2)
to whether several bursts or only one data
Sending Idle
CDCSS Encoder
is selected to output a
Send
Send Mode
Status
.
0.0000
is set
371