Beeper; Chan Space - HP 8920A User Manual

Beeper

Chan Space

(User Defined)
This field changes the audio beeper volume by selecting the desired level from a
list of choices. The beeper always beeps when the instrument is turned on,
regardless of this setting.
Operating Considerations
The beeper alerts you any time a message is displayed. Since a message may be
removed from the screen before you notice it, it is better to leave the beeper on to
alert you to errors during operation.
The beeper's volume setting is retained when the instrument is turned off.
This field specifies the RF channel spacing when the
, and the
Chan RF Chan Std
For example, entering
the receive frequency for channel 1 is 150.500 MHz, channel 2's receive
frequency would be 150.525 MHz.
Operating Considerations
The value of this field is only used if the
field is set to
RF Chan Std
See Also
(Gen)-(Anl) field description, on page 259
RF Chan Std field description, on page 262
Base Freq (User Defined) field description, on page 255
field is set to
USER-DEF
causes a 25 kHz spacing between each channel. If
25 kHz
RF Display
.
USER-DEF
Chapter 7, Configure Screen
Field Descriptions
field is set to
RF Display
.
field is set to , and the
Chan
257