Field Descriptions
Figure 121
The RF Analyzer Screen
AC Level
AM Depth
This is the default measurement for this field. The type of measurement listed here
is dependent on the
AF Anl In
See Also
AC Level field description, on page 496
AF Anl In field description, on page 101
"Displaying Measurements" on page 57
This field displays the percent depth of modulation of the AM signal. The field is
only visible when the
AF ANL In
.
AM DEMOD
rfascrn.wmf
settings.
field on the AF ANL screen is set to
Chapter 17, RF Analyzer Screen
Field Descriptions
AM MOD
or
473