Table of Contents
Advertisement
Operation
The Review Data Window
The Review Data Window
Clicking Review Data in the main window displays the Review Data window for
viewing your measurement data. To return to the main window, simply click
the Return to Main button. See
Figure 2-7 on page
2-24.
From the Review Data window, you can
select from five different presentations of
your data. Each view is selected by click-
ing one of five tabs. Two tabs present
gain data, if measured. To enable gain measurements, use the appropriate
item in the CD/Gain Meas command.
Refer to "CD measurement only or CD and
Gain measurement" on page
2-16.
Using the normalize dispersion button, you can change the y-axis data on the
review data graphs. This button toggles between showing chromatic disper-
sion data for the total measured path and showing the chromatic dispersion of
the path divided by the path length (in km). These two selections are shown in
Figure
2-6.
Figure 2-6. The normalize dispersion button
2-23
Advertisement
Table of Contents
