Chapter 22, Tests Screen
TESTS (Pass/Fail Limits)
TESTS (Pass/Fail Limits)
Figure 137
The TESTS (Pass/Fail Limits) Screen
NOTE:
The tests you select determine the specifications that are required. The HP 11807
documentation provides details if you are using HP 11807 software.
530
S:\HP892XX\USRGUIDE\manual\testscrn.fb
Pass/Fail limits are the radio manufacturer's upper and lower limits used by the
Tests Subsystem. For a radio to pass a test, the measured value must fall within
the test's limits. Tests results can be compared to only the lower limit, only the
upper limit, both the upper and lower limits, or no limits (
are sometimes referred to as specifications.)
tstpassf.wmf
). (Pass/Fail limits
None