HP 8920A User Manual page 261

The following fields are affected by the
• RX/TX Cntl in the CONFIGURE screen.
• Tune Mode in the TX TEST, DUPLEX TEST, and RF ANALYZER screens.
• Input Atten in the RF ANALYZER and SPECTRUM ANALYZER screens.
• Gain Cntl in the AF ANALYZER screen. This field controls three AF gain setting
fields:
Input Gain
De-Emp Gain
Notch Gain
Operating Considerations
The setting is primarily used when the instrument is operated by
Hold All
remote control, such as in an automated test system.
Unless you have very specific reasons for disabling the automatic functions, you
should set this field to
See Also
Programmer's Guide
Range Hold
when operating the instrument manually.
Auto All
Chapter 7, Configure Screen
Field Descriptions
field:
261